Water Treatment Plants

Product Details:

Specifications:

• Capacity in KLD are also available in 10kld, 20kld, 50kld, 100kld, 150kld, 200kld, 500kld, 1000kld.

• Feeb flow rate are also 50 m3/day, 100 m3/day, 500 m3/day, 1000 m3/day.

• Inlet flow rate are also 100 m3/day, 500 m3/day, 1000 m3/day, 2000 m3/day, 5000 m3/day, 10000 m3/day

• Installation type are complete civil work, perbrabicated, containerized plug and play

What Is Zero Liquid Discharge and How Does It Work?

Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment.

If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be worthwhile to pursue, but in the instances it's not mandated (some local and/or federal regulations might require ZLD), careful consideration must be made as to whether or not it will benefit your facility. Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld system, zero liquid discharge plant, zld plant, zero liquid discharge water treatment system

If your facility does require or is considering it, you might be wondering, "what is zero liquid discharge and how does it work?"

The complex answer to this question is simplified and broken down for you below:

What is a zero liquid discharge treatment system?

A ZLD treatment system utilizes advanced technological water treatment processes to limit liquid waste at the end of your industrial process to, as the name suggests, zero.

An efficient and well-designed ZLD treatment system should be able to: handle variations in waste contamination and flow allow for required chemical volumes adjustments recover around 95% of your liquid waste for reuse treat and retrieve valuable byproducts from your waste (i.e. salts and brines) produce a dry, solid cake for disposal

A ZLD treatment system will also help your facility meet stringent effluent requirements, such as the U.S. Environmental Protection Agency's Steam Electric Power Generating Effluent Guidelines. Just keep in mind your facility's requirements will vary based on whether you are discharging into a publicly owned treatment works (POTW) or to the environment under a National Pollutant Discharge Elimination System (NPDES permit).

What's included in a basic ZLD treatment system?

The exact components of a ZLD treatment system will largely depend on the volume of dissolved material present in the waste, the system's required flow rate, and what specific contaminants are present. But in general, a basic ZLD treatment system typically includes some type of: clarifier and/or reactor to precipitate out metals, hardness, and silica chemical feed to help facilitate the precipitation, flocculation, or coagulation of any metals and suspended solids filter press to concentrate secondary solid waste after pretreatment or alongside an evaporator.

ultrafiltration (UF) to remove all the leftover trace amounts of suspended solids and prevent fouling, scaling, and/or corrosion down the line of treatment reverse osmosis (RO) to remove the bulk of dissolved solids from the water stream in the primary phases of concentration brine concentrators to further concentrate the reject RO stream or reject from electrodialysis to further reduce waste volume evaporator for vaporizing access water in the final phases of waste concentration before crystallizing. crystallizer to boil off any remaining liquid, leaving you with a dry, solid cake for disposal